PDA

View Full Version : 12 second civic !!!!!!!!!!!!!!!!!


maxpsi
07-13-2003, 10:25 PM
New Best:
R/T .699
60ft. 1.917
330? 5.529
1/8 8.423
mph 85.71
ΒΌ 12.999
mph 107.56

Jim at Motorvations in Trussville, AL (plug) let me borrow his 22x8 M/T slicks. I started out with a 13.5, then a 13.3, and a 13.244. Then for the last run (one above) I dropped the tire pressure from 16psi to 12psi, changed the shiftpoint from 8000 to 7800 (I feel the need to visit my rev limiter too much), and just barely slipped the clutch at 6500rpm. Pulling that kind of 60ft. felt great. Track conditions: 90+ degrees, sticky track, and a little overcast (as if that mattered). This all on an open diff, stock driveline with exception to the CM stage 1 clutch, and stock block.

insert_car
07-13-2003, 11:57 PM
son of a biatch that is awesome!!!!! fucking AAAAAA! nice job man. was it hard to launch with the slicks.

insert_car
07-13-2003, 11:59 PM
oh yeah.. niiiice 60 ft. :metalhea:

maxpsi
07-14-2003, 12:23 AM
four tries. I just launched the hell out of it that last run.

Jess
07-14-2003, 12:28 AM
. 12.999
:bow:

Matt Harris
07-14-2003, 12:58 AM
Congrats!

ActiveAero
07-14-2003, 08:18 PM
Good job. Traction=good.

cheappower82
07-14-2003, 08:30 PM
V8 killa :roshambo:

cheappower82
07-14-2003, 08:34 PM
If you want to buy some wheels w/slicks, LMK.

Powdercoated
http://groups.msn.com/ALsupra/shoebox.msnw?action=ShowPhoto&PhotoID=12

Yokohama, baby!
http://groups.msn.com/ALsupra/shoebox.msnw?action=ShowPhoto&PhotoID=6

maxpsi
09-02-2003, 12:38 PM
Do you still have the cover that goes over the lugnuts:?:

cheappower82
09-02-2003, 08:30 PM
Yeah, but they need to be powdercoated; they're still clearcoated aluminum (looks retarded against the black)

maxpsi
09-03-2003, 02:00 PM
Hit it with some Autozone paint. :lol: