ActiveAero
02-16-2004, 11:23 PM
I will most likely be selling the following in the up coming future and would just like to go ahead and post it up.
JDM DC SS header, 2.5" collector (unlike the US DC headers smaller collector), decent shape, has been scraped on the bottom like every JDM DC, but hey its good enough to put my basically stock R into the 13's. Known as the best header for the money. I'll give it up for around $200 or so.
Skunk II stage one cams. A very good cam for mild compression cars. On par with Toda A's. Capable of hitting over 200whp with proper bolt-ons and tuning. As a bonus I'll throw in my modified STR cam gears. I switched out the bolts and washers, the bolt slots look a little rough in some spots, but hey they work and have never slipped. I'm not really selling them seperate, just think of them as a bonus with the cams. If you want to use them fine, if not no big deal. $375 gets the cams and gears.
Stock ITR outer valve springs with Portflow inners. Capable of easily with standing 9,500rpms. $40 will take them (I'll check them once removed to make sure there is no sag, if they are out of spec I won't sell them)
Stock ITR rods and pistons. Lighter than other B series rods, larger rod bolt than B18B's. Make offer.
JDM DC SS header, 2.5" collector (unlike the US DC headers smaller collector), decent shape, has been scraped on the bottom like every JDM DC, but hey its good enough to put my basically stock R into the 13's. Known as the best header for the money. I'll give it up for around $200 or so.
Skunk II stage one cams. A very good cam for mild compression cars. On par with Toda A's. Capable of hitting over 200whp with proper bolt-ons and tuning. As a bonus I'll throw in my modified STR cam gears. I switched out the bolts and washers, the bolt slots look a little rough in some spots, but hey they work and have never slipped. I'm not really selling them seperate, just think of them as a bonus with the cams. If you want to use them fine, if not no big deal. $375 gets the cams and gears.
Stock ITR outer valve springs with Portflow inners. Capable of easily with standing 9,500rpms. $40 will take them (I'll check them once removed to make sure there is no sag, if they are out of spec I won't sell them)
Stock ITR rods and pistons. Lighter than other B series rods, larger rod bolt than B18B's. Make offer.