PDA

View Full Version : WTT My S13 for a civic


Jess
05-01-2006, 02:09 PM
If anyone is interested in a trade, lemme know.

Engine

New spark plugs
NGK spark plug wires
Nismo motor mounts (less than 1k miles)
New coolant temp sensor
New air filter
New fuel filter
New oil and filter
Car has a stock exhaust that I had to do some welding on in order to get
the car ready for selling.  It has some pin-hole leaks in the exhaust.
**Runs enough to get where you're going but doesn't run properly. 
Engine reported to have "high miles"  You may want to consider towing if
it is going far.



*The engine has great compression (180 across the board).  I am not sure
why it is not running well.  It's probably something simple like a bad
injector or spark plug wire, bad TPS, MAFS or something.  I have removed
all unnecessary equipment from the engine, bay.  No EGR, AAC valves. Only
vacuum operated components still on the car are the FPR and secondary butterfly
actuator. Feel free to send me an email and set up a time to come see/drive
the car before the auction is over if you like.  I'll be out of town or
busy most weekends because I'm in the process of moving
Transmission & Drivetrain

Transmission shifts smooth. All synchros are good
Nismo transmission mount
JDM Silvia VLSD - works awesome



Suspension

KYB AGX adjustable shocks (less than 12k miles)
Suspension Techniques lowering springs (less than 12k miles)
SS Braided brake lines (less than 12k miles)
Hawk pads (up front, less than 12k miles)
Aluminum subframe spacers
Auction includes a pair of wheels that match the front.
Subframe spacers make for a slightly noisy ride because vibrations from
the road and differential come through the chassis more, but decrease wheelhop
substantially.

Interior

Beautiful S14 SE seats.  They ARE NOT PURPLE.  My camera makes
them look purple, but they are dark blue and light blue.  Very nice
seats.
Crack-free dashboard.
Converted from HUD to standard instrument cluster
Carpet is kinda purple and has the standard missing carpet near the trans
tunnel, but the floor mat covers that up
New head liner
Power windows work great
The car previously had an e-manage so instead of soldering back the wires,
I got a 100% stock harness from the junkyard and installed it.  No
spliced engine/ecu wires!
Sunroof does not leak
New shift boot
Passenger side power window switch cover missing. I keep forgetting to get
one from junkyard.
No radio is included
Car is running an Auto trans ECU so it idles a bit high for a few seconds
after coming off the gas.
Missing cover for ECU. I'll try to find it.



Body

Front bumper sags a bit but can be adjusted to look better
has a couple dents and dings.  Behind the driver door, there is a
dent I tried to pull out, thus the hole there.
Spoiler is only held in by a couple bolts, I lost the others. Makes a
little noise going over bumps
Shaved trunk keyhold
Shaved Antenna hole
Trim around back window still seals fine, but is a bit dryed out and could
use replacing if aesthetics are important to you
Car has been spray painted, obviously.



Other

Brand new Walbro 255 fuel pump
Brand new battery

</font>

http://67.33.14.41/240/4sale/1.jpg

http://67.33.14.41/240/4sale/2.jpg

http://67.33.14.41/240/4sale/3.jpg

http://67.33.14.41/240/4sale/4.jpg

http://67.33.14.41/240/4sale/5.jpg

http://67.33.14.41/240/4sale/6.jpg

http://67.33.14.41/240/4sale/7.jpg

http://67.33.14.41/240/4sale/8.jpg

http://67.33.14.41/240/4sale/9.jpg

http://67.33.14.41/240/4sale/10.jpg

http://67.33.14.41/240/4sale/11.jpg

http://67.33.14.41/240/4sale/12.jpg

http://67.33.14.41/240/4sale/13.jpg

http://67.33.14.41/240/4sale/14.jpg

houdene
05-01-2006, 04:14 PM
:( no more turbo. what did you do with it?

Jess
05-01-2006, 04:15 PM
Turbo and all of the turbo parts I'm not keeping are sold, unless you want to make a higher offer than $375 for the spinny thing that is.

IronMonkey
05-01-2006, 07:37 PM
Ill trade you catback man :) Was your manifold from JGS? You still got it? Im looking at KA-T for a summer project...after the vert is sold of course.

P.S , you'll need to add a vin number at ImportAtlanta or they'll delete that shit.

Jess
05-01-2006, 08:56 PM
Manifold is sold. It was an FMAX. I'll put the VIN up on dere

houdene
05-01-2006, 09:08 PM
how much you want to sell it for

Jess
05-01-2006, 09:11 PM
I dunno. How much you want to spend? I'm asking $2200 but its very negotiable

houdene
05-01-2006, 09:24 PM
I dunno. How much you want to spend? I'm asking $2200 but its very negotiable
I dont know thats kinda high. kbb is around $1500

Jess
05-01-2006, 09:27 PM
ITs got MODS DAWGGGGG!!!. But really if you're interested, throw an offer out there.

I took Rob and Dizzy for a ride tonite and they can testify that when its running good, it idles like a brand new car and pulls great - so the potential is there if the buyer can figure out WTF part is bad on it.

I'm probably gonna spend more time on it tues, wed. If I get it figured out, the price I take will most definitly go up FYI

houdene
05-01-2006, 09:55 PM
ITs got MODS DAWGGGGG!!!. But really if you're interested, throw an offer out there.

I took Rob and Dizzy for a ride tonite and they can testify that when its running good, it idles like a brand new car and pulls great - so the potential is there if the buyer can figure out WTF part is bad on it.

I'm probably gonna spend more time on it tues, wed. If I get it figured out, the price I take will most definitly go up FYI
let me talk to my dad and see. he likes the 240's also and wants a project car

Jess
05-01-2006, 09:57 PM
let me talk to my dad and see. he likes the 240's also and wants a project car

Alritee, not trying to sound like a salesman but hurry. Im entertaining all sorts of trades on importatlanta.com

IronMonkey
05-01-2006, 10:02 PM
My friend said that he would buy it for that price....but only if you take out the KA24DE engine before hand....he dont want to see that peice of shit engine....bahahahahahaha.

Jess
05-01-2006, 10:12 PM
My friend said that he would buy it for that price....but only if you take out the KA24DE engine before hand....he dont want to see that peice of shit engine....bahahahahahaha.

If he's serious, he's got a deal